SY7300
Highest output to size ratio for small format line arrays Large MF/HF horn and Phase Aligned™ LF drivers for exceptional 110° horizontal pattern to 160 Hz SY 7300Wizard auto-designs flown and ground-stacked arrays.Included Splay Brackets fix the splay angles between enclosures .16 ohm inputs allow powering 8 SY 7300 with 2 amplifier channels
l Operating Range .....................80Hz - 20kHz
l Nominal Beamwidth ................110°x12°
l Axial Sensitivity (whole space SPL)
l MF/HF …………..105 dB 230 Hz to 20 kHz
l LF ………………..91 dB 80 Hz to 230 Hz
l Peak Sensitivity (whole space SPL)
l MF/HF ………….112 dB 20 Hz to 20 kHz
l LF………………. 92 dB 20 Hz to 20 kHz
l Input Impedance (ohms)
l MF/HF ………….16 15.9 @ 680 Hz
l LF ……………….16 15.1 @ 250 Hz
l Dimensions (mm) ............... 330 H x 732W x386D
l Weights (kg)................. 41
SY 7600
The SY 7600 features FORSYTHE advanced divergence shading where all loudspeakers are powered at equal level. A full SY 7600 array can provide uniform sound coverage from directly beneath itself out to hundreds of feet without complex signal processing. Vertical coverage for the array is set by varying the rear splay of the enclosures, leaving the fronts tight-packed. This configuration produces a continuous, coherent wavefront from the array, projecting extended-range, high-resolution sound over its full coverage area.
l Operating Range: 80 Hz to 16 kHz (one enclosure)
l Beamwidth: 80° (h) x 3° (v)
l Power Handling/Output:
l TRI-AMPED: (LF) 2000W (4 ohms; 1000W at 8 ohms per driver) - 129dB SPL (long term)(MF) 800W (8 ohms) - 136dB SPL; (HF) 300W (8 ohms) - 138dB SPL
l Connections: 2 Neutrik NL8 Speakon
l Dimensions inches millimeters
n Front Height 14.5 368
n Rear Height 12.9 327
n Width 45.0 1143
n Depth 31.0 787
l Weight(Kg) :113.9
l 3-way full range
l LF - 2 x 12 in woofer, horn-loaded
l MF - 2 x 10 in cone, horn-loaded
l HF - 2 x 2 in exit, 75mm voice coil compression driver, horn-loadedPortable & Installation
SY7600s
The SY7600s bent horn subwoofer is engineered as both a complement to the SY7600 Series Line Array loudspeaker systems and as a bass supplement to any audio system. SY7600s provide extremely high levels of tight, punchy bass response to the lowest octave. Its balanced horn design allows it to be used singly or in multiples. The horns of multiple enclosures couple acoustically to create a single, larger horn that increases output and provides directivity to very low frequencies. Optimum performance is achieved when used in arrays of four or more enclosures.
l Frequency Response:+3 dB 29 Hz to 100 Hz,-10 dB 25 Hz
l Axial Sensitivity (dB SPL, 1 watt @ 1m):107
l Nominal Impedance (ohms):4 (2x 8)
l Calculated Maximum Output (dB SPL):Peak 145,Long Term 139
l Subsystem 2x 12-in woofers, bent horn
l Dimensions( inches /millimeters)
l Height 30/762
l Width 30/762
l Depth 45/1143
l Weights (pounds/kilograms)
l Net Weight 253/115
l Shipping Weight 273/125
SY7300s
The SY7300s is designed as a companion to SY7300 Line Arrays,but is suitable for other applications requiring high output at low frequencies in a highly compact format. Used in arrays of two or more, the SY7300 couple to extend the low frequency response. The unique enclosure shape both enhances the acoustical performance and serves to provide a solid base for a ground-stacked SY7300 array. The SY7300s enclosure is 1.5 times the height of a SY7300, which allows attractive SY7300/SY7300s arrays to be assembled in a 3:2 ratio.
l Subsystem: LF(2x 12”)
l Operating Range 33 Hz to 155 Hz
l Nominal Beamwidth :Horz 360°xVert 360°
l Axial Sensitivity (whole space SPL):96 dB 33 Hz to 155 Hz
l Peak Sensitivity (whole space SPL):104 dB 20 Hz to 20 kHz
l Input Impedance (ohms,)Sub1/2 4ohms; Sub 1, Sub 2 8ohms
l Accelerated Life Test:Sub1/2 69 V 1200 W @ 4 ohm;Sub 1, Sub 2 69 V, 69 V 600 W, 600W @ 8 ohm
l Dimensions (mm) (mm) :495H x 730FW/417BW x 696D
l Weights (kg):.56.3
